Author Topic: Problem with Super Mario All Stars  (Read 77 times)

Offline Sfm15

  • Baby Retrode
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Problem with Super Mario All Stars
« on: 19/Jul/2017 12:14:02 AM »
I am having a problem with Super Mario All Stars for SNES.  I have put it in and tried to clean the terminals but it comes up as 2600Cartridge.a26.  I have tried playing with the configuration file to make it sense the cartridge as an SNES game but it hasn't worked.  What can I do?

Offline Aleron Ives

  • Junior Retrode
  • **
  • Posts: 38
  • Karma: +2/-0
    • View Profile
Re: Problem with Super Mario All Stars
« Reply #1 on: 19/Jul/2017 06:58:10 PM »
It's possible that you missed one pin when you were trying to clean the cartridge. That's all it takes to mess up the dump. The most likely culprits would be the farthest pins on each edge of the cartridge, since you can't rub a cotton swab across them, due to the edge of the shell getting in the way. I was able to fix a similar problem by rubbing up and down on the edge pins, instead. If that doesn't work, you may want to try the cart on real hardware to make sure it still works.

Offline Sfm15

  • Baby Retrode
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: Problem with Super Mario All Stars
« Reply #2 on: 20/Jul/2017 12:52:03 AM »
I actually opened the cartridge so incould get to every pin and it works perfectly fine in the console.

Offline skaman

  • Baby Retrode
  • *
  • Posts: 18
  • Karma: +6/-0
    • View Profile
Re: Problem with Super Mario All Stars
« Reply #3 on: 20/Jul/2017 03:24:03 AM »
Did you override the autodetect?

In the config file, use "[forceSystem] snes".

Good luck!