Retrode Community Forum

General Category => Support => Topic started by: PSTrooper on 20/Jun/2016 12:03:21 AM

Title: Gameboy Camera Not Reading Properly After 1.9 Update
Post by: PSTrooper on 20/Jun/2016 12:03:21 AM
I have to use force gboy to get it to load now, but even so, the save file just shows 0kb now. No other game I tested had this problem.
Title: Re: Gameboy Camera Not Reading Properly After 1.9 Update
Post by: Wannado on 03/Jul/2016 06:37:41 PM
I'll look into it, but I need some additional information:

Title: Re: Gameboy Camera Not Reading Properly After 1.9 Update
Post by: Wannado on 25/Sep/2016 07:25:19 PM
I added support for GB SRAM sizes 64 kiB and 128 kiB in v0.20 beta (see the post in the "Megadrive SRM ..." thread (http://forum.retrode.org/index.php/topic,337.msg2333.html#msg2333)). This will hopefully enable access to GB Camera saves (128 kiB).
Title: Re: Gameboy Camera Not Reading Properly After 1.9 Update
Post by: hadess on 24/Nov/2017 01:37:56 AM
I'll look into it, but I need some additional information:
  • Which firmware version have you been using when reading the GB camera save still worked?
  • Please take a look at the .gb file with a hex editor: What are the values at offsets 147 hex (327 dec) and 149 hex (329 dec) of the GB camera ROM?
  • What's the file name of the .gb / .sav file?
  • What's the size of the .gb file?
  • Do the first few hundred bytes from the start of the .gb file repeat at offset 4000 hex (16384 dec)?

I've replied in the newer thread at http://forum.retrode.org/index.php/topic,383.0.html